Acidizing/stimulation

CO2-Energized-Acid Treatment Reduces Freshwater Use, Boosts Well Performance

Carbon dioxide (CO2) with 30% foam quality (FQ) has been introduced for the first time during acid fracturing treatments in a tight, sour, high-pressure/high-temperature carbonate gas reservoir in Saudi Arabia.

ogf-2013-08-pfcr-foamhero.jpg
Source: Getty Images.

Carbon dioxide (CO2) with 30% foam quality (FQ) has been introduced for the first time during acid fracturing treatments in a tight, sour, high-pressure/high-temperature carbonate gas reservoir in Saudi Arabia to reduce consumption of fresh water, minimize reservoir damage, reduce the flowback period, and eliminate the need for nitrogen lifting with coiled tubing. The addition of liquid CO2 to hydrochloric acid (HCl) in quantities sufficient to produce emulsion allows live acid to retard and penetrate much deeper than HCl alone.

Introduction

Gases were introduced to the oil and gas industry primarily as an aid to recover pumped stimulation fluids. This application still accounts for the majority of use of nitrogen and CO2. Special applications, such as foaming stimulation fluids, have reduced consumption of the liquid phase significantly.

Stimulation activities have been increasing dramatically in Saudi Arabia. During each stage of fracturing stimulation in Saudi Arabia, up to 3,000 bbl of groundwater is used.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.