Reservoir characterization

High-Resolution Seismic Stochastic Inversion as a Direct Input for Reservoir Modeling

Three-dimensional reservoir models are best created with a combination of well logs and 3D-seismic data. However, the effective integration of these results is not easy because of limited seismic resolution.

jpt-2017-03-techsyn26404hiresseismic-6.jpg
CNPC

Three-dimensional reservoir models are best created with a combination of well logs and 3D-seismic data. However, the effective integration of these results is not easy because of limited seismic resolution. With the increasing quality of seismic data and wide application of new methods, high-resolution seismic-stochastic-inversion volume was used as a direct input to reduce the uncertainty of the reservoir model. Used as a direct input for reservoir modeling, this method reduces the uncertainty of the model greatly.

Introduction

A common method of reservoir modeling is the stochastic modeling method.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.