Drilling/completion fluids

Polymer Replacement for Organophilic Clay Benefits Mineral-Oil-Based Drilling Fluids

Organophilic clays mixed in oil-based drilling fluids (OBDFs) do not exhibit the same viscosity or suspension characteristics as they do in water-based drilling fluids. A new mineral-oil-based drilling fluid (MOBDF) was created by replacing the conventional organophilic clay with a novel polymer.

jpt-2018-11-191776.jpg

Organophilic clays mixed in oil-based drilling fluids (OBDFs) do not exhibit the same viscosity or suspension characteristics as they do in water-based drilling fluids because electrical interaction between particles is minimal, creating difficulty in building viscosity and gel strength under high-pressure and high-temperature (HP/HT) conditions. To address that problem, a new mineral-oil-based drilling fluid (MOBDF) was created by replacing the conventional organophilic clay with a novel polymer.

Introduction

Organophilic clays are widely used as primary viscosifiers for OBDFs and synthetic-based drilling fluids. These chemicals are prone to stratification in certain conditions, slow chemical-reaction times, high pressure spikes, and high equivalent circulating densities (ECDs). These mud systems also have temperature limitations. At high temperatures, thermal thinning and thermal degradation of their organophilic colloids permanently destroy their viscosification capabilities.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.