Completions

Intelligent Completion in Water-Injector Well Improves Field Development

The operator piloted a new well-completion design combining inflow-control valves (ICVs) in the shallow reservoir and inflow-control devices (ICDs) in the deeper reservoir, both deployed in a water-injector well for the first time in the company’s experience.

jpt-2019-04-192850hero.jpg

The operator piloted a new well-completion design combining inflow-control valves (ICVs) in the shallow reservoir and inflow-control devices (ICDs) in the deeper reservoir, both deployed in a water-injector well for the first time in the company’s experience. The objectives were to improve reservoir management, reduce well-construction complexity, and achieve cost optimization. This paper covers the overall aspects of well performance in commingled injection mode.

Introduction

The offshore field was discovered in 1971 in the Arabian Gulf. On the basis of results from exploratory wells, three main reservoirs were proposed for further development (A, B, and C). The commercial phase of the field started successfully, with first oil in 2015 provided by the two first wellhead towers as part of the Phase I development plan.

The completion design described in this paper is aligned with an optimized field-development plan (FDP) resulting from a study initiated in 2017. The main objectives of the study were integrating new acquired data to upgrade static and dynamic reservoir models to identify any opportunity for extra production and cost optimization.

Early water breakthrough caused by the initial elected well pattern and the associated oil-producer-to-water-injector spacing is a significant risk.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.