Decarbonization

Report Picks Breakthrough Technologies for Decarbonization

The Technology Outlook report from DNV GL identifies three technologies that have the potential to decarbonize carbon-dioxide-heavy industries significantly by 2030: new battery storage chemistries, high-temperature heat pumps, and green hydrogen.

to2030-2.jpg

Global energy consulting company DNV GL has released its Technology Outlook report, which identifies three breakthrough technologies that will significantly accelerate the decarbonization of industries such as energy, transport, and heating in the next 10 years.

They are

  • New battery storage chemistries: Solid-state batteries are expected to take the lead, driven by the demand to decarbonize the transport sector.
  • High-temperature heat pumps: Next generation heat pumps will reach temperatures of 200°C, which can support industrial heat demand.
  • Green hydrogen: Green hydrogen can compete against blue hydrogen by 2030, creating new applications for decarbonizing the heat and transport sectors.

Fossil fuels have dominated the world’s primary energy supply for the last century, but the transition to a more integrated and low-carbon energy system is now gathering momentum. Future energy systems are focusing on low-carbon production and use, and the energy transition is rapidly moving beyond the power sector into other carbon-intensive industries.
The driver for this second phase of the energy transition is the global need to limit carbon emissions, leading to more than doubling the share of electricity powered by wind and solar energy in the final energy demand mix, compared with today’s level.

“In its first phase, the energy transition was focused on decarbonizing the power sector, which was effectively done by creating market incentives to promote the uptake of solar and wind energy. Twenty years later, these forms of green power generation are not only safe and reliable but have also become cost-competitive,” said Lucy Craig, vice president of technology and innovation at DNV GL Energy. “The second phase of the energy transition is shifting toward CO2-intensive industries, which are much harder to decarbonize, such as the transport and heating sectors. Therefore, we require equally decisive and binding policy actions to get emerging technologies such as green hydrogen, high-temperature heat pumps, and new types of battery storage chemistries off the ground and build momentum for a similar success to that of core decarbonization technologies.”

According to DNV GL, these supporting policy actions could include financial incentives such as carbon taxes or price guarantees, nationally binding policy ambitions and targets, investments into research and development efforts, as well as regulatory measures such as industry standards or mandates, for example, for efficiency measures of buildings.

Solid-State Battery Technology

The decarbonization of the transport sector is a major driving force for the development of new types of battery storage technologies. Currently, lithium-ion (Li-ion) technology constitutes 95–99% of the batteries used in the transportation industry. Yet, this widely adopted rechargeable battery is not optimal for safety or resource utilization.

Solid-state battery technology has the potential to address most of the concerns with present-day Li-ion batteries. Made from solid electrolyte, solid-state batteries can have three times higher energy density and potentially double the cycle life of current Li-ion batteries.

Present day Li-ion batteries using ethylene carbonate are flammable, contributing to concerns about battery fires. A solid-state electrolyte is nonflammable. Solid-glass electrolytes can operate and maintain high conductivity at sub-zero temperatures down to −20°C, addressing a major shortcoming of standard electric vehicle batteries. Currently solid-state batteries are not being produced in high volumes.

To improve the range, charging time, and performance of electric vehicles, car manufacturers are investing heavily in the scaling of new battery technologies. Until recently, the energy density of Li-ion batteries was at 160 Wh/kg. Today’s Li-ion electric vehicle batteries have an energy density of 250 Wh/kg today and are trending toward 300 Wh/kg by fine-tuning the existing materials inside and their designs.

Early-generation solid-state batteries are expected to have an energy density of 400 Wh/kg, possibly leading to commercial scale production of 400–500 Wh/kg batteries by 2030.

The challenges in development are converting the insertion of solid electrolytes to a process that is compatible with today’s manufacturing practices, all without affecting the durability or cost of the final product while adding benefits such as better energy and power density, increased safety, and higher throughput.

Despite these challenges, DNV GL said it expects that, by 2030, commercially available passenger electric vehicles featuring solid-state batteries will be available on the market.

High-Temperature Heat Pumps

Similarly to the transport industry, the heating sector is transforming because of the growing political demands to decarbonize. Currently, the global heating sector represents the largest single end-use of energy, contributing 30% of global CO2 emissions in 2018.

Using heat pumps for space heating is not new, but the focus on reducing CO2 emissions and the increased use and excess supply of electricity enable this technology to scale; and, with scale comes a reduction in cost.

DNV GL’s research shows that technological advancement of heat pumps could meet the energy demands for industrial processes that require temperatures up to 200°C. These new types of high-temperature heat pumps will be commercially available by 2023.

Current heat pump performance of heat production five times the electricity input could be improved significantly in this decade with new designs of integrated systems including waste heat. This can lead to performance improvements, such as waste heat capture and other innovative systems improvements of more than 10 times the electricity input.

If such breakthroughs are made, heat demand would shift toward electricity-based heating and further increase rates of decarbonization.

Green Hydrogen

DNV GL anticipates that green hydrogen can compete against blue hydrogen by 2030. With growing demand to scale-up the production of green hydrogen, DNV GL expects that capital costs for electrolysers will reduce significantly and they will operate mainly when electricity prices are low. In this scenario, electrolysers operate intermittently, in step with fluctuating power prices, and hydrogen storage or complementary blue hydrogen production is available to ensure hydrogen supply.

DNV GL predicts that electrolysis will become a common part of hydrogen supply somewhere between 2030 and 2035, depending on the following factors:

  • Price of natural gas, which in turn is influenced by the cost of CO2 emissions
  • The duration of oversupply of variable renewable energy
  • Expected cost reductions for the developments for electrolysers

As prices for green hydrogen decrease, DNV GL’s research shows that several countries are likely to implement it for heating applications to decarbonize their building sector.
In the manufacturing industry, hydrogen has the potential to replace coal and gas for cleaner heating processes where electric heating with heat pumps or direct electric heating is not suitable. It can also start replacing cokes as a reduction agent in iron and steel production beyond 2030, which could significantly reduce emissions.

Find the report here.