Enhanced recovery

Pilot Tests of New Enhanced-Oil-Recovery Technologies for Heavy-Oil Reservoirs

Thermal steam stimulation is considered the most effective of current methods for heavy-oil production. However, the method has problems with low coverage by steam injection and decreased efficiency.

jpt-2016-03-neweorhero.jpg
Getty Images

Thermal steam stimulation (TSS) is considered the most effective of current methods for heavy-oil production. However, the method has problems with low coverage by steam injection and decreased efficiency at later stages of development. This paper presents the results of solving these problems by combining thermal steam and physicochemical stimulations and using “cold” technologies involving thermotropic gel-forming and oil-displacing systems.

Introduction

In Russia, the amount of oil reserves considered difficult to recover is constantly increasing. Active reserves account for one-third of all prospected reserves, and the difficult-to-recover oil reserves account for 67%. High-viscosity oils are 13% of the difficult-to-recover oils, and low-permeability formations account for 36%. The amount of heavy and high-viscosity oil is several times greater than the amount of light and low-viscosity oil.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.