Reservoir characterization

Estimation of Flow and Hysteresis Parameters Applicable to WAG Experiments

In the complete paper, a new assessment of the WAG-hysteresis model, which was developed originally for water-wet conditions, was carried out by automatic history matching of two coreflood experiments in water-wet and mixed-wet conditions.

jpt-2018-01-183321-hero.jpg

Water-alternating-gas (WAG) injection has demonstrated encouraging results for improving oil recovery. However, numerical simulation of three-phase flow and the associated hysteresis effects are not well-understood. In the complete paper, a new assessment of the WAG-hysteresis model, which was developed originally for water-wet conditions, was carried out by automatic history matching of two coreflood experiments in water-wet and mixed-wet conditions. The results indicate that history matching the entire WAG experiment would lead to a significantly improved simulation outcome.

Introduction

Using an optimization software, the authors have carried out a series of history-matching exercises on coreflood experiments to evaluate the performance of the WAG-hysteresis model and to simulate WAG experiments conducted on mixed-wet and water-wet cores at near-miscible conditions.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.