Well integrity/control

Design and Surveillance Tools Help Lower Integrity Risks for High-Temperature Wells

a

jpt-2018-01-184159f1.jpg
Fig. 1—Stress/strain behavior of steel grades typically used in thermal applications.

Thermal-well operations come with significant additional complexity in regard to maintaining wellbore integrity and hydraulic isolation from other formations. This is because of the extreme loads that may be placed on the well casing and liners, caused by the wide set of operating temperatures and pressures the wellbores may experience. To ensure that the wellbores can fulfill their anticipated operating need safely, careful design of the casing, liners, connections, and cement during the project-development phase is an absolute requirement.

Background

Wells designed for heavy-oil thermal-recovery projects will be exposed to a potentially wide range of operating temperatures. These can exceed 340°C for the deepest heavy-oil-bearing formations and can be as low as 5°C during well workovers.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.