Reservoir characterization

Electromagnetic Imaging Offers First Look at the Propped Rock

Understanding how much rock is being stimulated and propped is critical for unconventional producers. New imaging methods using electromagnetic energy or acoustic microemitters could represent a milestone in understanding what is left behind after fracturing.

jpt-2016-03-fig1electro.jpg
Carbo Ceramics created this image of a propped fracture using specially coated proppant stimulated by electromagnetic energy. This image of the heel stage of a ConocoPhillips well in the Delaware Basin is the first use of this method in a working well. Proppant injected: 230,000 lb; maximum length, height, and width: 440 ft, 330 ft, and 240 ft, respectively; propped reservoir volume: 1.4 MMcf.
Image courtesy of Carbo Ceramics

A series of images that look like yellow lumps on a line are the first-ever images of the area around the wellbore where fractures have been propped open using specially coated proppant stimulated by electromagnetic (EM) energy.

The images created by Carbo Ceramics could represent a milestone on the journey to find an answer to a critical question facing unconventional producers—how much rock is being stimulated and propped with grains of sand or ceramic for maximum production?

“People see the value in this area; they are starved for this,” said Terry Palisch, global engineering adviser for Carbo, who described what is seen in the images as the propped reservoir volume.

Four groups of researchers are seeking a direct way to visualize what is left behind after fracturing. Three of the projects involve getting images by using proppant specially treated to be visible when stimulated by EM energy.

Microseismic images currently used in the industry to show fracturing results are based on the popping sounds of rocks rubbing against each other, like fingers snapping, but not the quiet, productive work of opening fractures and pumping in proppant to ensure they stay open.

“Microseismic doesn’t really tell us where the proppant has gone. It shows where failure events are occurring,” said Mukul Sharma, a petroleum engineering professor at the University of Texas (UT) at Austin. He heads the Hydraulic Fracturing and Sand Control Joint Industry Project (UT Fracturing JIP) at UT, which is leading one of the projects mentioned earlier.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.