It has been a year since my last lecture/rant about corporate shortsightedness. I am sure my concerns were taken to heart and everyone was able to spend the last year working on training, documenting best practices, tracking failure root causes and costs, and optimizing lift efficiency. This allows me to focus on a problem unique to the extraction industries. This problem arises because we work at the transition from unbound, heterogeneous nature to bound, homogeneous controlled environments.
Our problem is that we are dealing with multiphase, multicomponent fluids whose compositions change spatially and temporally inside imperfectly understood heterogeneous reservoirs whose characteristics also change spatially and temporally. When a black-oil correlation comes with the caveat that the results are ±20%, they are not kidding. And when they specify a range of validity that we blithely exceed, all bets are off. When we take Darcy’s law for linear flow of water through a homogeneous sandpack and manipulate it to apply to multiphase flow through a heterogeneous multilayer reservoir, we have to make assumptions. Sure, we can break the reservoir into a grid and assign values to each grid, but the truth is we do not know with certainty what the reservoir properties are outside of near-wellbore regions. We use algorithms to come up with grid properties, but we are really just making educated guesses.
What are we to do? The most common approach is to plug in our best-guess data and use the results as truth. New engineers feel a sense of accomplishment for a job well done. More-experienced engineers hope for the best. Old codgers like me hope nothing catches on fire.
We see the results of this uncertainty all around us. Wells do not produce as expected, equipment runs are inconsistent, reserves estimates are constantly revised.
A better approach is to recognize that we are working in a world of uncertainty. At a minimum, create a worst case, a best case, and a most-likely case. Many do this, but they do not always appreciate that the only thing for certain is that the most-likely case will not happen. With any luck at all, the results will fall somewhere between the worst and best cases. A bigger problem is the temptation to seize upon the best case because it is the only one that will meet the fiscal requirements for the project. It is easy for me to tell you to just say no, but people have emotional buy-in to their projects and often feel that their career depends upon the project going forward.
What we should do is use error analysis and statistical methods to define uncertainty. The propagation of uncertainty through mathematical equations can be calculated. It was required in my physical-chemistry lab almost 40 years ago. We can calculate statistically expected results. It is nothing new and is well-understood. We just do not apply it to our own uncertainty. As engineers, we should demand or create software that allows input data to be defined as either a value and uncertainty or a range and distribution. Results should be given either a measure of the uncertainty or a distribution.
I selected these papers because the authors have recognized, embraced, and accepted uncertainty. The papers describe how they addressed uncertainty to find a solution for their problems.
This Month's Technical Papers
Recommended Additional Reading
OTC 24799 A New Model for the Accurate Prediction of Critical Liquid Removal Based on Energy Balance by Xiao-Hua Tan, Southwest Petroleum University, et al.
SPE 175310 Improving the Electrical Submersible Pump’s Operational Time by 50% Using the Six-Sigma Procedures by M. Ahmad, Kuwait Institute for Scientific Research, et al.
SPE 176194 The Success Story of the Light-North Area of Roger Block: Continuous Exertion To Increase Electrical-Submersible-Pump Performance Through Rectifying Design Process To Resolve MDSS Problem by Cintani Kusuma Dewi, Chevron Pacific Indonesia, et al.
Mike Berry, SPE, Independent Artificial-Lift Consultant
01 July 2016
Intermittent Gas Lift Used in Hydrate Mitigation and Flare Reduction in Algeria
Hassi Messaoud is a mature oil field with more than 1,100 production wells. Approximately half of the wells are natural flow and the other half use continuous gas lift (CGL) with concentric (CCE) strings.
Boosting Uncovers True Value of Subsea Assets
The first subsea multiphase boosting system was installed in 1994. Since then, it has grown into a technology with a global track record.
Shale Producers Piloting Downhole Compression To Solve Liquid Loading
Using maglev technology, a new artificial lift system seeks to boost production output by sucking down reservoir pressure from inside the wellbore and from inside the reservoir.
No editorial available
Don't miss out on the latest technology delivered to your email weekly. Sign up for the JPT newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
06 November 2019
04 November 2019
05 November 2019
07 November 2019
05 November 2019
No editorial available