Importance of Flow Conditioning for Separator Performance
During September, the SPE Separations Technology Technical Section hosted “Flow Conditioning Impact on Separations,” presented by Cris Heijckers, managing director of Kranji Solutions.
Heijckers discussed the importance of the distribution of fluid flows in separation vessels. The flow distributions are affected by the vessel, the configuration of its internals, and the layout of the upstream piping connecting to the vessel’s inlet nozzle.
He explained the effects of inlet piping layouts on the flow distribution as it enters the vessel, comparing simulation results of gas-phase computational fluid dynamics (CFD) for various piping layouts. Using multiphase CFD simulations, liquid behavior was illustrated.
Pipe fittings, such as valves, affect the performance of separation vessels. A pressure drop across a valve creates a shearing effect on droplets, making them smaller and more difficult to separate. By optimizing the configuration and location of the vessel’s inlet piping, droplet coalescence can be promoted, which is beneficial to the performance of the separator.
Heijckers concluded with the following guidelines:
- Although CFD analysis investigates the effects of inlet piping layouts and fittings, adequate CFD expertise and separation know-how are required to interpret and understand the simulations to avoid a “nonsense in, nonsense out” outcome.
- When planning the inlet piping configuration, avoid horizontal positioning of the last pipe bend before the vessel inlet. Generally, the farther upstream of the vessel bends in the pipe occur (in the same vertical plane), the better the separation performance.
- An increase in a pipe’s straight length, defined as the distance between the pipe’s last bend and the vessel’s inlet nozzle, affects gas distribution; however, it has more effect on liquid inflow distribution.
- Because pressure drops across valves cause droplet shearing and severe gas maldistribution in the vessel, it is recommended that valves be located as far upstream of the vessel as possible.
- Inlet pipe bends and pipe fittings can cause swirling flow in piping, leading to maldistribution of flow in the vessel.
- For nonideal piping layouts and critical applications, CFD analysis is recommended.
- The configurations of vessel internals and their effects on flow distribution require consideration during the design of the separation process.
Water Survey Assesses Souring and Corrosion at Production/Injection Plant
At a water treatment plant for an onshore oil field in northern Germany, formaldehyde injection was started in 2015 as a biocide. The goal of this study was to understand the chemical parameters and microbial distribution in the water system and whether formaldehyde injection was effective.
Addressing the Gaps in Subsea Produced Water Treatment
Operators are looking for ways to better handle water coming from subsea wells, which is typically treated at topside facilities. Subsea separation systems are not equipped to discharge water back into the reservoir, so how do companies close the gaps?
Production Monitoring Gets Smarter With Virtual Meters
Virtual metering technology has been in use for years as a cost-effective means of monitoring production, but what else can it do? How reliable is it as a backup to physical multiphase meters?
Don't miss out on the latest technology delivered to your email every two weeks. Sign up for the OGF newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
09 September 2019
09 September 2019
05 September 2019
05 September 2019
10 September 2019