Formation evaluation

Better Permeability Estimation From Wireline Formation Testing

The complete paper presents different methods of using pressure-transient data from WFTs; many of these methods are summarized here.

jpt-2018-02-18914hero.jpg

The use of pressure-transient data in formation testing to describe reservoirs is considered mature technology, particularly when applied to data collected through production testing. The extension of this technique to data obtained using wireline formation testers (WFTs) has been gaining momentum in the industry; however, the integration of these outputs with other measurements of data is not always straightforward. The complete paper presents different methods of using pressure-transient data from WFTs; many of these methods are summarized here.

Pressure-Transient Data From WFTs

Perhaps the most widely used form of WFT pressure-transient data is that derived from small-volume drawdowns and buildups during a pressure test. The volume of fluid withdrawn from the formation, and the resulting depth of the pressure pulse, is limited to the near-wellbore region.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.