Savvy Separator Educational Video Series Now Available
The newly launched video series featuring speaker Bob Chin, the creator and editor of the OGF Savvy Separator Series of articles, provides a basic level of understanding of separator design and troubleshooting.
The Savvy Separator: A Century of Carry-Over—0.1 gal/MMscf
For as long as anyone can remember, the liquid carry-over separation efficiency of 0.1 gal/MMscf has been ubiquitously specified in separator design. This article provides the most likely scenario of its evolution.
The Savvy Separator: Lessons for Installation of Separator Internals
Process design of separation internals is just one step in improving the vessel performance. Just as important are the support design and installation steps. These lessons learned help to guide good off- and on-site planning to minimize separator turnaround.
Savvy Separator: 5 Lessons To Simplify Separator Troubleshooting
Troubleshooting and solving separation problems takes a combination of analytical tools, experience, and a knack for investigation. These 5 lessons provide a starting point for assessment.
Savvy Separator: Oversizing Separators—Too Much of a Good Thing?
Oversizing a separator ensures meeting the life cycle needs of a facility, but are we setting ourselves up for failure in the long run? With peak rates typically being short-lived at best, or at worse, well beyond actual production rates, more weight needs to be given to the tail-end of production.
The Savvy Separator: The Code Implications of Retrofitting Separators
This article highlights some of the code and registration issues the Savvy Separator engineer encounters when retrofitting a vessel with internals to improve or restore the process performance of the separator.
The Savvy Separator: Physical Processes Behind Oil Droplet Coalescence During Water Treatment
By understanding the factors involved in oil droplet coalescence, the Savvy Separator engineer can assess the operational/chemical factors in the treatment system that are affecting droplet growth and make adjustments to enhance coalescence rates.
Savvy Separator: Operational Troubleshooting of Separators
In this tenth article of the series, the author focuses primarily on specific operational elements of troubleshooting rather than the mechanical design of the separator.
Savvy Separator: Taming Tower Carry-Over
Lessons learned in debottlenecking a “dirty” triethylene glycol contactor at the ExxonMobil Upstream Research Company’s LaBarge Black Canyon Facility in Wyoming highlight the results of work performed between 2001 and 2004.
Savvy Separator: Level Design and Control in Gravity Separators
In this eighth articles of the series, level settings and control in gravity separators are addressed.
Savvy Separator: Introduction to CFD for Separator Design
Why CFD should be part of your separator design? This goal of this goal is to allay any fears about CFD that you may have as a result of flashbacks to university class and a dizzying array of partial-differential equations.
Savvy Separator: Underperforming Gas Scrubbers: How to Fix Them and How to Avoid Them
The main drivers for sizing gas scrubbers have been performance requirements, process conditions, and project specifications. However, optimizing cost, delivery times, and weight is not the same as improving scrubber performance.
Savvy Separator Series: The Effect of Shear on Produced Water Treatment
The sources and magnitude of shear and the effects on oil droplet size can have significant consequences for downstream separation equipment performance.
Savvy Separator: The Ghosts of Separators Past, Present, and Future
Lessons learned by the members of the SPE Separations Technology Technical Section, representing more than 250 years' experience, are presented so that the same mistakes are not repeated in the future.
Savvy Separator: Scrubber Debottlenecking
An underperforming scrubber that was suffering from too much oil carry-over is described along with options for debottlenecking and improving performance.
Savvy Separator: The Effect of Inlet Geometries on Flow Distribution
Efficient separation assumes uniform flow, but the reality of inlet geometries can invalidate this assumption, leading to separation problems and loss of separation efficiency.
Savvy Separator: Design of Cyclone Separators: Internals and Liquid Levels
Some internals components affect a separator's gas- and liquid-handling capability because of their effects on the liquid level. In this article, the interdependency of cyclonic inlets, cyclonic mist eliminators, and liquid level is highlighted.
Don't miss out on the latest technology delivered to your email every two weeks. Sign up for the OGF newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
29 September 2020
08 October 2020
01 October 2020